Project Introduction
The waterproof test is applicable to electrical and electronic products that may be subjected to flushing during transportation, storage or use. This water comes from heavy rain, wind and rain, sprinkler systems, wheel splashes, flushing or violent waves. The relevant specifications should specify whether the electrical and electronic products must work normally during the test, or whether they can only withstand the flushing conditions and remain intact.
For portable, outdoor and automotive electronics, there are waterproof test requirements, whether it is IEC, MIL or ETSI and SAE in the world have developed corresponding test requirements.
waterproof level
IEC/EN60529 waterproof is divided into 9 levels (level 0 ~ level 8), waterproof level (e.g.IPX4-waterproof level 4):
Level 0: Completely waterproof and unprotected
Level 1: Water dripping vertically should have no harmful effects
Level 2: When the vertical surface of the shell is inclined within 15°, the vertical dripping should have no harmful effects
Level 3: Water is sprayed within 60° of each vertical plane without harmful effects
Level 4: Splashing water in all directions of the housing without harmful effects
Level 5: No harmful effects by spraying water in all directions
Level 6: Strong water spray in all directions of the shell without harmful effects
Level 7: After being immersed in water of specified pressure for a specified period of time, the amount of water in the shell will not reach harmful levels
Level 8: According to the conditions agreed by the manufacturer and the user (should be harsher than Level 7), the water intake of the shell after continuous diving will not reach harmful levels
RCM certification is a certification system implemented by Australia and New Zealand to ensure that electrical products comply with local safety, electromagnetic compatibility, and other standards.
FCC ID certification is a mandatory requirement under US law. The Federal Communications Commission (FCC) in the United States strictly regulates issues such as electromagnetic compatibility and radio interference in electronic products. As an electronic communication device, routers are only allowed to be sold and used in the US market if they have obtained FCC ID certification, otherwise they will face legal penalties and market bans.
CE-RED certification is a mandatory requirement for market access in the European Union. According to relevant EU regulations, all wireless devices entering the market must be certified by RED (Wireless Device Directive) to ensure compliance with EU standards.
The waterproof test is applicable to electrical and electronic products that may be subjected to flushing during transportation, storage or use. This water comes from heavy rain, wind and rain, sprinkler systems, wheel splashes, flushing or violent waves.
Get a quote